| Click to Post a New Message!
Page [ 1 ] |
|
|
Yamaha Generator problem
If this is a ground fault receptacle or circuit it may have a reset on the receptacle itself or on another receptacle in the circuit. Depending on code there and when the house was built your receptacles outside or near the outside probably are ground fault circuits.
Adding to Murf's concern, are you having power on the male end of a cord that could be unplugged while the generator is running making a live circuit easy for anyone like a child to get shocked or even killed on?
Hope you well. kt
|
|
Add Photo
Bookmarks: |
|
|
|
Yamaha Generator problem
Well guess when it read
"out of the receptacle."
would have been good to ask which receptacle. Wish you well. kt
|
|
Add Photo
Bookmarks: |
|
|
|
Yamaha Generator problem
Murf is probably hitting the nail on the head.
IF you have not, find out the wattage of what you are wanting to run. On motors such as refregiators or freezers you need to use the starting wattage and NOT the running wattage. Be sure the total load is within your generator's ability or figure what items to remove to get there.
Trying to plug into your house circuit as you did, picks up a lot of items you may not think of. The lights by themself may exceed your generator. Some electric applicances and such use some power when off. Many items using small amounts can quickly add up. kt
|
|
Add Photo
Bookmarks: |
|
|
|
Yamaha Generator problem
Sure don't know much about how electric motors can vary with their internally wiring but I would have thought Billy correct.
Makes me wonder if amp meter was placed on one leg and the other broken if there is an amp draw? Unless it were to feed somewhere such as through the ground (of course not proper) then how does it have a power load or usage if one of the lines is broken? It has alway been my understanding electricty had to have a complete path. kt
|
|
Add Photo
Bookmarks: |
|
|
|
Yamaha Generator problem
I would guess this thread has become hijacked already but something I use to see (out of that work now) which many did not pay attention to is the proper wiring of a lamp or light fixture. The "live" part is the part of the center of the buld and not the outside base of the bulb. So simple but so often given no attention to. If wired backwards it is possible to touch 110 volts with some fixtures. Much like breaking just one leg of a 220 circuit. Stay safe. kt
|
|
Add Photo
Bookmarks: |
|
| |
|
Page [ 1 ] | Thread 144588 Filter by Poster: 4 | 1 | 7 | 6 | 1 | 1 | 1 | 5 | 6 |
|
()
Picture of the Day joyce1
Unanswered Questions
Active Subjects
Hot Topics
Featured Suppliers
|