| |
|
|
bridge for Island
Art
Do you think Installing cross ties(welding)cut from the part of the frame I do not need would be a proper method to obtain the support.
Murf
OWSJ's maybe found at what kind of company. Can they be purchased in 10' or so lengths and then bolted together.
Is prefab the method for these units.
Peters
This is the answer I got back from Jetfloat maybe in the future they will come stateside.
Dear Mr Padgett,
We have received your enquiry via our UK representative.
Unfortunately we have no dealers in the USA and due to a lack of capacity in
our local sales department we regret to advise that we are unable to assist
you with your enquiry.
With best regards
JETFLOAT INTERNATIONAL
Gesellschaft m.b.H.
Yolande Vercammen
|
|
 Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
Bridge? Are you all kidding - the island is 50' by 50'. It seems to me that this is like building an interstate to service a village. IMO you need a cheap push mower and a kids blow-up boat. Place the push mower in the dingy and paddle over. After the first go-round it should take you less than an hour.
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
understood, kind of a can I do it sort of thing. I have been using the boat method. Island is Ga. red clay slick as eel slime not easy to load and off load. If I have to build a landing area might as well make a bridge. Both kids moved away and took the raft.
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
I linked both the UK and Canadian dealers on the other post. The link to the US dealers is below.
Link:
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
AnnBrush brings up a good point. For an island that small you could buy a cheap used mower and just keep it on the island.
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
KW
Ann did have a great Idea do you think the interstate should be two or three lanes.
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
I'd hire a Huey to fly in a ZTR and built a 25'x20' pole barn to keep it in!
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
Speaking of wastes it wasn't but a month ago but the head of the transportation from our congress has a couple of new bridges that will be near record for helping so few as welll as the cost. This bridge is much the same a bit of over kill but so is what our government doing!
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
CB
You gotta love America. Not a problem my wife has a good job.
|
|
Add Photo
Bookmarks: |
|
|
|
|
bridge for Island
SG, any structural steel or even welding shop can make them up. For that matter you could do it yourself if you can weld.
They can be built in bolt together sections, but aren't very heavy by the foot anyways. Get full length units and just use a rope to pull them into place. I would think 2 or 3 guys could jockey them into position by hand.
They are just a long bent piece of rebar, sandwiched between 4 pieces of angle iron.
Best of luck.
|
|
Add Photo
Bookmarks: |
|
|
|
Gas Generator Weather Protecti
01-23-2006, 15:00 
Pics
Reply
Digg It 
Del.icio.us 
