|
|
|
Looking for parts
Looking for carb and fuel pump for 1995 6x4 gator. If anyone has them at a decent price let me know.
Thanks to all those who post. I was able to pick up my problem from the previous threads.
|
|
 Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
Hi, I have a carb for a Kawaski liquid cooled engine. The engine was blown when I purchase the gator. I will sell the carb in used shape as it for $35.
|
|
Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
Sounds good. If you like send me a PayPal invoice for the total amount including shipping. my email address is riclavallee@response-911.com
|
|
Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
I need 2 coils. Do you have them for sale and if so how much.
|
|
Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
Are both your coils missing or just not firing? I've never seen two bad coils on the same engine at the same time. Very rare that they go bad. I would check the blk/wht wire coming from the output side of the ign. trigger harness. It is a ground and should be connected to the lower left flywheel cover bolt. Also that hole in the cover should have a metal sleeve in it to transfer the ground to the block. Also check the trigger and the harness connections for contamination. Also pull the connectors back on the coils and see if they are getting voltage, the yel/wht on each coil should be hot when the key is on and the wht on one coil and the blk/yel on the other coil are the feeds from the ign. module.
|
|
Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
there is voltage going into the coils when you crank it but nothing comeing out when you crank it over. thats the reason i though both coils could be bad. There is a wire not plugged in comeing of the bottom of the motor on the right side as you stand behind the gator, flywheel side, I cannot find a place for it to plug in. The excitor is new on it and the relay under the excitor is replaced. The starter would not work until I replaced this relay.
|
|
Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
What color is the wire that is not plugged in? Is there a blk/wht wire on either plug that plugs into the ign. module? ( I'm assuming that's what you are calling the excitor ) Blk/wht wire should be in the plug with the blk/yel, wht, and yel/wht wires. If there is an empty spot in that plug the blk/wht goes there. Location is the opposite corner from the wht wire. Coils will not work without this blk/wht ground wire.
|
|
Add Photo
Bookmarks: |
|
|
|
|
Looking for parts
That was it the blk/wh wire had come out of the plug in to the module, when I put it in, it fired right up. Thanks alot
|
|
Add Photo
Bookmarks: |
|
|
|
Gas Generator Weather Protecti
10-18-2009, 18:09 
Digg It 
Del.icio.us 